Some tools will be used on every installation, while others will be optional based on the site specific requirements for each facility. Review the below videos to learn more.
Tools & Materials- Nodes
Tools & Materials- Endpoints
Required Tools List:
| Attachment Power Tools such as a Cordless Impact Driver or Cordless Hammer Drill and corresponding drivers, bits, and accessories (Self Drilling Metal Screws, Drywall Anchors, Masonry Screws, etc.) | 2.5 mm Hex Key |
| Tools to expose the metal of the machine such as 80 grit sandpaper, wire wheel, grinder, or a file | Loctite 342 Threadlocker |
| Degreaser and Lint Free Rags | Loctite 330 with Activator |
| Battery Chargers for the COrdless Drills | Two 22m Wrenches |
Optional Tools:
| Tool Case/Tool Bag | Wire Snips |
| Channel Lock Pliers | Razor |
| Locks | Flashlight |
| Level |
Zip Ties |
| Needle Nose Pliers | Thread Tapper |
| Dust Mask and Filters | Angled Welding Magnet |
| Tape Measure | Screwdrivers |
| Heavy Duty Double Sided Tape | Cordless Heat Gun |
| CAT-V Cable | Steel Wire and Crimps |
Comments
0 comments
Please sign in to leave a comment.